galvapole street lighting pole

street light Pole have specific specifications and standards before design. Whether it's Led Street Lights heads, driving power supplies, Lamp Poles, or embedded parts, they all have design specifications and standards. These must meet normal specifications and standards in order for LED street lights to function properly and safely.
Common parameter introduction:
When designing the wind resistance level of Light Post, basic information such as the upper and lower diameters, wall thickness, wind resistance, height, and material of the posts should be known
1. Wall thickness:
The wall thickness of the Street Light Pole refers to the thickness of the steel plate used in the production of the Lamp Post. Common specifications include 2.3mm, 2.5mm, 2.75mm, 3mm, 3.5mm, 4mm, 4.25mm, 4.5mm, 5mm, etc.
2. Round rods and vertebral rods:
There are two common types of streetlight poles: round poles, square poles, octagonal poles, and conical poles. Round poles refer to poles with the same upper and lower diameters, commonly used in situations where the height of the pole is not high. Vertebrate poles refer to poles with different upper and lower diameters, commonly used in situations where the height of the pole is high. Vertebrate poles have better mechanical strength and wind resistance than round poles.